Profiled metal sheets (as top layer)
Tray panels have to be able to compensate tolerances of the tower diameter. Resulting openings between the tray panels that have to be closed - depending on the tightness requirements - e.g. by sealing plates.
Profiled metal sheets as top layer are put above the opening that shall be sealed and are screwed together wtih the help of a existing screw opening. Usually such metal sheets are used in the region of the support ring.
| Type | Sketch | Descritpion |
|---|---|---|
SP |  | Profiled plate with hole diameter 11mm. |
Element list
| ID | Name | Material | Comment | A | B | C | D | Image |
|---|---|---|---|---|---|---|---|---|
| SP-100 | Sealplate s=2mm L=100mm | A F | 100 |  |
||||
| SP-115 | Sealplate s=2mm L=115mm | A F | 115 |  |
||||
| SP-125 | Sealplate s=2mm L=125mm | A F | 125 |  |
||||
| SP-140 | Sealplate s=2mm L=140mm | A F | 140 |  |
||||
| SP-75 | Sealplate s=2mm L=75mm | A F | 75 |  |
||||
| SP-90 | Sealplate s=2mm L=90mm | A F | 90 |  |
Material
Please refer to the material information.