Thin sealing plates (as intermediate layer)
Tray panels have to be able to compensate tolerances of the tower diameter. Resulting openings between the tray panels have to be closed - depending on the tightness requirements - e.g. by sealing plates.
Thin sealing plates (normal thickness 0,5mm) are put between two clamped metal sheets and tightened together with them.
|Thin plate with elongated hole 15mm.|
|ST-100x30x0,5||Seal Plate s=0,5 100x30mm||A||100||30||0.5|
|ST-100x45x0,5||Seal Plate 0.5mm 100x45mm||A||100||45||0.5|
Please refer to the material information.